Heated bath

From LIMSWiki
Revision as of 16:01, 20 September 2022 by Shawndouglas (talk | contribs) (Turned into a transclusion)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Heated bath schema. 1: Heated substance. 2: Heating medium. 3: Laboratory flask. 4: Bowl. 5: Gas burner

A heated bath is used in the laboratory to allow a chemical reaction to occur at an elevated temperature.[1]

In contrast to traditional Bunsen burners, heated baths use liquids to transfer heat to the reaction vessel. This is achieved using a high-boiling point liquid inside a thermally conducting bath (usually made of metal). Water and silicone oil are the most commonly used fluids. A water bath is used for temperatures up to 100 °C. An oil bath is employed for temperatures over up to and above 100 °C.

The heated bath is heated on an electric hot plate, or with a Bunsen burner. The reaction vessel (Florence flask, Erlenmeyer flask, or beaker) is immersed in the heated bath. A thermometer is usually kept in the fluid to monitor the temperature.

See also

References

  1. ^ Furniss, Brian S.; Vogel, Arthur Israel, eds. (2009). Vogel's textbook of practical organic chemistry (New. ed., 5. ed., rev. [Nachdr.] ed.). Harlow: Pearson/Prentice Hall. ISBN 978-0-582-46236-6.


Notes

This article is a direct transclusion of the Wikipedia article and therefore may not meet the same editing standards as LIMSwiki.