Template:Comprehensive Guide to Developing and Implementing a Cybersecurity Plan/Introduction

From LIMSWiki
Revision as of 19:26, 24 July 2020 by Shawndouglas (talk | contribs) (Created as needed.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Innovation & Research Symposium Cisco and Ecole Polytechnique 9-10 April 2018 Artificial Intelligence & Cybersecurity (40631791164).jpg

Title: Comprehensive Guide to Developing and Implementing a Cybersecurity Plan

Edition: First

Author for citation: Shawn E. Douglas

License for content: Creative Commons Attribution-ShareAlike 4.0 International

Publication date: July 2020


Look across the internet and you will find a wealth of information about cybersecurity and the cybersecurity plan. However, much of that information is either disparate or, if comprehensive, difficult to access or expensive to acquire. In particular, a walk-through of the various steps involved with how an organization or individual develops, enforces, and maintains a cybersecurity plan is difficult to come by. This guide attempts to fill that gap, including not only a 10-step walk-through but also insight into regulations, standards, and cybersecurity standards frameworks, as well as how they all fit together with cybersecurity planning. Additionally, this document provides access to An Example Cybersecurity Plan, a companion document that provides a representative example of the 10-step walk-through put to use. This guide also includes a slightly simplified version of many of the security controls found in the National Institute of Standards and Technology's (NIST) Special Publication 800-53, Rev. 4, with additional resources to provide context, and mappings to LIMSpec, an evolving set of specifications for laboratory informatics solutions and their development. The guide attempts to be helpful to most any organization attempting to navigate the challenges of cybersecurity planning, with a slight bias towards laboratories implementing and updating information systems.

The table of contents for Comprehensive Guide to Developing and Implementing a Cybersecurity Plan is as follows:


1. What is a cybersecurity plan and why do you need it?

1.1 Cybersecurity planning and its value

2. What are the major regulations and standards dictating cybersecurity action?

2.1 Cybersecurity standards frameworks

3. Fitting a cybersecurity standards framework into a cybersecurity plan

3.1 How do cybersecurity controls and frameworks guide plan development?

4. NIST Special Publication 800-53, Revision 4 and the NIST Cybersecurity Framework

4.1 NIST Cybersecurity Framework

5. Develop and create the cybersecurity plan

5.1 Develop strategic cybersecurity goals and define success
5.2 Define scope and responsibilities
5.3 Identify cybersecurity requirements and objectives
5.4 Establish performance indicators and associated time frames
5.5 Identify key stakeholders
5.6 Determine resource needs
5.7 Develop a communications plan
5.8 Develop a response and continuity plan
5.9 Establish how the overall cybersecurity plan will be implemented
5.10 Review progress

6. Closing remarks

6.1 Recap and closing

Appendix 1. A simplified description of NIST Special Publication 800-53 controls, with ties to LIMSpec

Appendix 1.1 Access control
Appendix 1.2 Awareness and training
Appendix 1.3 Audit and accountability
Appendix 1.4 Security assessment and authorization
Appendix 1.5 Configuration management
Appendix 1.6 Contingency planning
Appendix 1.7 Identification and authentication
Appendix 1.8 Incident response
Appendix 1.9 Maintenance
Appendix 1.10 Media protection
Appendix 1.11 Physical and environmental protection
Appendix 1.12 Planning
Appendix 1.13 Personnel security
Appendix 1.14 Risk assessment
Appendix 1.15 System and services acquisition
Appendix 1.16 System and communications protection
Appendix 1.17 System and information integrity