Difference between revisions of "User:Rthiggins/StateCannabisTestingRegulations/Alaska"

From LIMSWiki
Jump to navigationJump to search
(Transferred content from previous page)
 
(Added SOP requirements section)
Line 19: Line 19:


====SOP requirements====
====SOP requirements====
Testing facilities must have a written manual of standard operating procedures (SOPs) on site and available to all employees at all times. It must provide detailed instructions on how to perform each testing method the facility uses, as well as the minimum standards for each test. The SOP manual must cover
* Sample preparation for each matrix that will be tested;
* Reagent, solution, and reference standard preparation;
* Instrument setup, if applicable;
* Standardization of volumetric reagent solutions, if applicable;
* Data acquisition;
* Calculation of results;
* Identification criteria
* Quality control frequency
* Quality control acceptance criteria
* Corrective action protocols
5. Personnel qualifications
5. Personnel qualifications
6. Testing Required
6. Testing Required

Revision as of 16:15, 16 September 2018

Regulatory scheme

Medical use of marijuana was legalized in Alaska after the 1998 election. The law allows certified physicians to recommend treatment with medical marijuana to their patients with qualifying debilitating diseases. Patients must register with the state, and thereafter may legally possess, use, and cultivate limited quantities of marijuana.[1]

The law does not provide guidance or regulation related to the legal opening and operation of marijuana dispensaries within the state. With the approval of adult-use of marijuana, effective 2016, new regulatory structures were codified that cover all aspects of the marijuana industry in Alaska. Medical and retail marijuana now share a common set of regulations, including those for inventory tracking and laboratory testing.[1]

Licensing requirements

Alaska defines four types of marijuana establishments: retail marijuana store, marijuana cultivation facilities, marijuana product manufacturing facilities, and marijuana testing facilities. All establishments must be licensed by the Marijuana Control Board, and each of the four types has its own license.

Marijuana testing facilities

A person or organization may not offer or provide marijuana testing services or results unless they have applied for and obtained a Marijuana Testing Facility license. There is an initial application that is common to all establishments, followed by a supplemental application for the specific type of facility. Testing facility icensing requirements do not apply to a licensed marijuana establishment that conducts in-house testing using its own equipment to test material produced within the same facility.

Conflict of interest

The code specifically states that a holder of a marijuana testing facility license may not hold another type of marijuana license in Alaska. Further, the licensee, or any employee or agent of the licensed testing facility are prohibited from having an ownership interest or direct or indirect financial interest in another licensed marijuana establishment within the state. Finally, the licensee may not have a financial interest in common with a person who holds a license in Alaska for a marijuana establishment other than a testing facility.


Privileges and prohibitions

Licensed marijuana testing facilities may have any amount of marijuana/products on premises at any given time as long as facility inventory tracking system used and indicates all marijuana on site is for testing purposes. However, distribution, sale, or transfer of marijuana directly to a consumer is prohibited, as is consumption of marijuana by anyone while on the premises of the testing facility.

SOP requirements

Testing facilities must have a written manual of standard operating procedures (SOPs) on site and available to all employees at all times. It must provide detailed instructions on how to perform each testing method the facility uses, as well as the minimum standards for each test. The SOP manual must cover

  • Sample preparation for each matrix that will be tested;
  • Reagent, solution, and reference standard preparation;
  • Instrument setup, if applicable;
  • Standardization of volumetric reagent solutions, if applicable;
  • Data acquisition;
  • Calculation of results;
  • Identification criteria
  • Quality control frequency
  • Quality control acceptance criteria
  • Corrective action protocols


5. Personnel qualifications 6. Testing Required


References

  1. 1.0 1.1