User:Shawndouglas/sandbox/sublevel13

From LIMSWiki
Jump to navigationJump to search

Sandbox begins below

10. Instrument and Equipment Management

Regulation, Specification, or Guidance Requirement
ASTM E1578-18 E-3-1 10.1 The system should provide a means for tracking usage of laboratory equipment and instruments.
ASTM E1578-18 E-3-2 10.2 The system shall provide a means for planning the use of and reserving equipment and instruments.
ASTM E1578-18 E-3-3 10.3 The system shall be able to bring an instrument online and take an instrument offline both manually and via a configurable scheduler.
ASTM E1578-18 E-3-4 10.4 The system should record instrument usage time to assist laboratory personnel with capacity planning and scheduling.
ASTM E1578-18 E-3-5 10.5 The system shall allow users to configure and record multiple instrument events for the same instrument, including different event types and different frequencies for the same event type.
ASTM E1578-18 E-3-6 10.6 The system shall be able to group instruments together in specific ways, including by type and laboratory location.

21 CFR Part 211.67–68
21 CFR Part 211.160 (b-4)
21 CFR Part 211.30 (b)
21 CFR Part 211.60 (e)
21 CFR Part 225.30 (b-4)
21 CFR Part 211.606.60
21 CFR Part 211.820.70 (g)
21 CFR Part 211.820.72
42 CFR Part 493.1252 (b-3)
42 CFR Part 493.1255
AAFCO QA/QC Guidelines for Feed Laboratories Sec. 2 AAVLD Requirements for an AVMDL Sec. 5.5 ABFT Accreditation Manual Sec. E-20 ASCLD/LAB Supp. Reqs. for the Accreditation of Forensic Science Testing Laboratories 5.6.1.1 AIHA-LAP Policies 2018 2C.3.7–2C.3.10 ASTM E1578-18 E-3-7 EPA 815-R-05-004 Chap. IV, Sec. 7 EPA ERLN Laboratory Requirements 4.11.11–13 EPA QA/G-5 2.2.6–7 ISO 15189:2012 5.3.1.4 ISO/IEC 17025:2017 6.4.7 ISO/IEC 17025:2017 6.4.8 USDA Administrative Procedures for the PDP 5.2.4 USDA Data and Instrumentation for PDP 5.2 USDA Data and Instrumentation for PDP 6 WHO Technical Report Series, #986, Annex 2, 13.5 WHO Technical Report Series, #986, Annex 2, 16.23

10.7 The system shall allow the configuration of calibration and maintenance frequency and time frames, with available intervals of days, weeks, months, and years.