File:Microfluidic chip for point-of-care medical devices.jpg
From LIMSWiki
Jump to navigationJump to search
Size of this preview: 800 × 533 pixels. Other resolutions: 320 × 213 pixels | 640 × 427 pixels | 1,024 × 683 pixels | 1,280 × 853 pixels | 2,560 × 1,707 pixels | 6,720 × 4,480 pixels.
Original file (6,720 × 4,480 pixels, file size: 14.37 MB, MIME type: image/jpeg)
Summary
| Description |
English: The microfluidic chip is a key element of future lab-on-a-chip devices that can be used outside hospitals. This chip solves one of the most common problems in analysis systems – the accurate dilution of reagents in a given ratio with subsequent mixing. Such manipulations are carried out millions of times a day, for example, by mixing the patient’s blood and reagents to detect diseases or check the patient’s compatibility with drugs. The chip consists of a microfluidic part with channels with a height of 50 and a width of 200 micrometers and a detection system of metal electrodes on a glass substrate. The manufacturing process of such a device includes dozens of technological operations: from lithography of the topology of the device layers to the precision multilayer assembly. Such devices of personalized medicine will allow in the shortest possible time to cope with serious threats to public health, including pandemic diseases.
Русский: Микрофлюидный чип для портативных систем персонализированной медицины будущего
Микрофлюидный чип – ключевой элемент будущих лабораторий на чипе – портативных мобильных устройств для оперативного проведения анализов без сложного лабораторного оборудования. Этот чип решает одну из наиболее распространенных задач в системах анализа – точного разведения реагентов в заданном соотношении с последующим смешением. Такие манипуляции проводятся миллионы раз в день, например, при смешении крови пациента и реагентов для выявления заболеваний или проверки совместимости пациента с лекарственными средствами. Чип состоит из микрофлюидной части с каналами высотой 50 и шириной 200 микрометров и детектирующей системы из металлических электродов на стеклянной подложке. Процесс изготовления такого устройства включает десятки технологических операций: от литографии топологии слоев устройства до прецизионной многослойной сборки (бондинга). Появление подобных устройств персонализированной медицины в России и мире позволит в кратчайшие сроки справляться с такими вызовами времени, как пандемии опасных вирусов. |
| Source | Own work |
| Author | FMNLab |
| Camera location |  | View this and other nearby images on: OpenStreetMap |  |
|---|
FMN Laboratory, Bauman Moscow State Technical University
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the Creative Commons Attribution 4.0 International license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:17, 29 May 2020 | | 6,720 × 4,480 (14.37 MB) | FMNLab | Uploaded own work with UploadWizard |
File usage
The following 4 pages use this file:
- Template:Adding COVID-19 and other virus testing to your laboratory
- Template:COVID-19 Testing, Reporting, and Information Management in the Laboratory/Adding COVID-19 and other virus testing to your laboratory/What methodologies will you use?
- LII:COVID-19 Testing, Reporting, and Information Management in the Laboratory/Adding COVID-19 and other virus testing to your laboratory
- Book:COVID-19 Testing, Reporting, and Information Management in the Laboratory/Adding COVID-19 and other virus testing to your laboratory/What methodologies will you use?
