Polyaxial screw

From LIMSWiki
Revision as of 20:48, 22 February 2016 by Admin (talk | contribs) (Transcluded, per John)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

A polyaxial screw is used for connecting vertebrae to rods in spinal surgery, particularly spinal fusion procedures. It is a type of screw whose spherical head is enclosed in a housing, which allows the screw a range of motion along several different axes relative to the housing. The ball joint allows the surgeon some flexibility in placing the screws. The screws are typically placed into the pedicle of the vertebra.

It has also been hypothesized that polyaxial screws add a safety benefit by failing in the housing/screw interface before breaking in the shaft of the bone screw or in the orthopaedic rod.

Unlike standard lateral mass plate and screw systems, the new cervical polyaxial screw and rod system easily accommodates severe degenerative cervical spondylosis and curvatures. This instrumentation system allows for polyaxial screw placement with subsequent multiplanar rod contouring and offset attachment.[1]

References

  1. ^ Subach, Brian R.; Haid, RW; Traynelis, VC; Sasso, RC; Subach, BR; Fiore, AJ; Rodts, GE (15 Jan 2002). "Posterior Cervical Fixation Using a New Polyaxial Screw and Rod System: Technique and Surgical Results". Neurosurg Focus. 12 (1): E8. PMID 16212335.

Notes

This article is a direct transclusion of the Wikipedia article and therefore may not meet the same editing standards as LIMSwiki.