Difference between revisions of "User:Shawndouglas/sandbox/sublevel8"

From LIMSWiki
Jump to navigationJump to search
Tag: Reverted
 
(46 intermediate revisions by the same user not shown)
Line 7: Line 7:


==Sandbox begins below==
==Sandbox begins below==
[[File:Battery Manufacturing Lab (50954228316).jpg|right|500px]]
Material testing can focus on specific industries (e.g., automotive, construction, and pharmaceutical), products (e.g., car seats, asphalt, and medical devices), or raw materials (e.g., steel, gravel, and zirconia ceramic).


'''Title''': ''LIMS Selection Guide for Manufacturing Quality Control''
About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/


'''Edition''': First Edition
Material testing domains:
* Aerospace
**Adhesives
**Composites
**Fasteners
**Paints and primers
**Sealants
**Etc.
*Automotive
**Adhesives
**Coatings
**Foams
**Lighting and high-visibility solutions
**Plastics
**Seating
**Etc.
*Carbon
**Activated carbon
**Coal tar
**Etc.
*Coatings, linings, and sealants
**Ceramic coatings
**Metal coatings
**Pipe linings
**Thermal sprays
**Etc.
*Construction and engineering
**Asphalt
**Brick and tile
**Fasteners
**Fenestration and glazing products (i.e., windows, doors, glass)
**Geosynthetics
**Plumbing
**Soil
**Etc.
* Insulation, foam, and composites
**Fiberglass
**Flexible and laminate urethane foam composite
**Polyester resins
**Etc.
*Lubricants and thickeners
**Metallic stearates
**Powdered metal
**Pre-formed grease thickeners
**Etc.
* Medical devices
**Ceramics
**Metals
**Screws
**Etc.
*Metals
**Aluminum
**Castings
**Copper
**Rebar
**Steel
**Tubing
**Welds
**Zinc
**Etc.
* Packaging and labeling
**Cardboard
**Label adhesives
**Pharmaceutical packaging
**Sterile barrier materials
**Etc.
* Paints and oils
**Interior/Exterior paints
**Organic coatings
**Paint on parts
**Transformer oil
**Etc.
* Paper
**Cellulose paper tape
**Crepe paper and tubes
**Kraft paper
**Pressboard
**Etc.
*Polymers and plastics
**Biopolymers
**Condoms and gloves
**Payment cards
**O-rings
**[https://www.sciencedirect.com/science/article/pii/S1751616121005105 Silicone-based biological tissue mimics]
**Thermoplastic resins
**Etc.
* Raw materials
**Food and beverage ingredients
**Elemental material
**Pharmaceutical ingredients
**Etc.
* Reference materials
**Cannabinoids
**Coals and cokes
**Elemental gasses
**Isotope reference material
**Organic analytical reference material
**Pesticides
**Etc.
*Rubbers
**Bump stops
**Gloves
**Neoprene
**Silicone
**Tires
**Etc.
*Electronics and energy devices
**Batteries
**Semiconductors
**Solar panels
**Transformers
**Etc.
*Textiles
**Carpet
**Drapery
**Non-woven fabrics
**Upholstery
**Etc.
*Wood
**Dowel
**Flooring
**Lumber
**Medium-density fibreboard (MDF)
**Etc.


'''Author for citation''': Shawn E. Douglas
Test method developers:
 
* Aerospace Industries Association (AIA/NAS/NASM)
'''License for content''': [https://creativecommons.org/licenses/by-sa/4.0/ Creative Commons Attribution-ShareAlike 4.0 International]
* American Architectural Manufacturers Association (AAMA)
 
* American Association of State Highway and Transportation Officials (AASHTO)
'''Publication date''': To be determined
* American Association of Textile Chemists and Colorists (AATCC)
 
* American Institute of Timber Construction (AITC)
 
* American National Standards Institute (ANSI)
To be written...
* American Petroleum Institute (API)
 
* American Society of Mechanical Engineers (ASME)
The table of contents for ''LIMS Selection Guide for Manufacturing Quality Control'' is as follows:
* American Welding Society (AWS)
 
* American Wood Protection Association (AWPA)
 
* AOAC International (Association of Official Agricultural Chemists; AOAC)
<!--:[[LII:LIMS Selection Guide for Manufacturing Quality Control/Introduction to manufacturing laboratories|1. Introduction to manufacturing laboratories]]//-->
* ASTM International (ASTM)
:[[User:Shawndouglas/sandbox/sublevel9|1. Introduction to manufacturing laboratories]]
* Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
::1.1 Manufacturing labs, then and now
* Canadian Standards Association (CSA)
::1.2 Laboratory roles and testing in the industry
* Chemical Fabrics & Film Association (CFFA)
:::1.2.1 R&D roles and testing
* Consumer Product Safety Commission (CPSC)
:::1.2.2 Pre-manufacturing and manufacturing roles and testing
* Deutsches Institut für Normung (DIN)
:::1.2.3 Post-production regulation and security roles and testing
* Electronic Components Industry Association (ECIA/EIA)
:::1.2.4 Tangential laboratory work
* European Telecommunications Standards Institute (ETSI)
::1.3 Safety and quality in the manufacturing industry
* Federal Motor Vehicle Safety Standard (FMVSS)
 
* FM Approvals (FM)
<!--:[[LII:LIMS Selection Guide for Manufacturing Quality Control/Standards and regulations affecting manufacturing labs|2. Standards and regulations affecting manufacturing labs]]//-->
* GE Aerospace (GE)
:[[User:Shawndouglas/sandbox/sublevel10|2. Standards and regulations affecting manufacturing labs]]
* Government and military (MIL, [https://fedspecs.gsa.gov/s/federal-standards Fed], Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
::2.1 Globally recognized manufacturing standards
* Industrial Fasteners Institute (IFI)
:::2.1.1 Food and beverage
* Institute of Electrical and Electronics Engineers (IEEE)
:::2.1.2 Materials
* International Atomic Energy Agency (IAEA) ([https://www.iaea.org/topics/material-analysis 1], [https://www.iaea.org/topics/other-non-destructive-testing 2], [https://www.iaea.org/topics/materials 3])
:::2.1.3 Pharmaceutical and medical devices
* International Code Council (ICC-ES)
:::2.1.4 Other industries
* International Electrotechnical Commission (IEC)
::2.2 Regulations and laws around the world
* International Maritime Organization (IMO)
:::2.2.1 Food and beverage
* International Organization for Standardization (ISO)
:::2.2.2 Materials
* International Safe Transit Association (ISTA)
:::2.2.3 Pharmaceutical and medical devices
* IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
:::2.3.4 Other industries
* Japanese Standards Association (JAS/JIS)
::2.3 Other influencing factors
* NACE International (National Association of Corrosion Engineers; NACE)
:::2.3.1 Good manufacturing practice (GMP) and current good manufacturing practice (cGMP)
* National Fire Protection Association (NFPA)
:::2.3.2 Standards and Scientific Advice on Food and Nutrition (SSA)
* [https://www.dot.ny.gov/divisions/engineering/structures/manuals/scm/repository/SCM_4th_Edition_1-2018.pdf New York State Steel Construction Manual (NNSSCM/SCM)]
 
* NSF International (National Sanitation Foundation; NSF)
<!--:[[LII:LIMS Selection Guide for Manufacturing Quality Control/Choosing laboratory informatics software for your manufacturing lab|3. Choosing laboratory informatics software for your manufacturing lab]]//-->
* Pressure Sensitive Tape Council (PSTC)
:[[User:Shawndouglas/sandbox/sublevel11|3. Choosing laboratory informatics software for your manufacturing lab]]
* Radio Technical Commission for Aeronautics (RTCA)
::3.1 Evaluation and selection
* Suppliers of Advanced Composite Materials Association (SACMA)
:::3.1.1 Technology considerations
* SAE International (SAE/AMS/AS)
::::3.1.1.1 Laboratory informatics options
* TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
:::3.1.2 Features and functions
* Truss Plate Institute (TPI)
::::3.1.2.1 Base features
* UL Standards and Engagement (UL)
::::3.1.2.2 Specialty features
* United States Pharmacopeia Convention (USP)
:::3.1.3 Cybersecurity considerations
:::3.1.4 Regulatory compliance considerations
:::3.1.5 System flexibility
:::3.1.6 Cost considerations
::3.2 Implementation
:::3.2.1 Internal and external integrations
::3.3 MSW, updates, and other contracted services
::3.4 How a user requirements specification fits into the entire process (LIMSpec)
 
<!--::[[LII:LIMS Selection Guide for Manufacturing Quality Control/Resources for selecting and implementing informatics solutions|4. Resources for selecting and implementing informatics solutions]]//-->
:[[User:Shawndouglas/sandbox/sublevel12||4. Resources for selecting and implementing informatics solutions]]
::4.1 LIMS vendors
::4.2 Consultants
::4.3 Professional
:::4.3.1 Trade organizations
:::4.3.2 Conferences and trade shows
::4.4 LIMSpec
 
<!--::[[LII:LIMS Selection Guide for Manufacturing Quality Control/Taking the next step|5. Taking the next step]]//-->
:[[User:Shawndouglas/sandbox/sublevel13|5. Taking the next step]]
::5.1 Conduct initial research into a specification document tailored to your lab's needs
::5.2 Issue some of the specification as part of a request for information (RFI)
::5.3 Respond to or open dialogue with vendors
:::5.3.1 The value of demonstrations
::5.4 Finalize the requirements specification and choose a vendor
 
<!--::[[LII:LIMS Selection Guide for Manufacturing Quality Control/Closing remarks|6. Closing remarks]]//-->
:[[User:Shawndouglas/sandbox/sublevel14|6. Closing remarks]]
 
<!--::[[LII:LIMS Selection Guide for Manufacturing Quality Control/Blank LIMSpec template for manufacturing labs|Appendix 1. Blank LIMSpec template for manufacturing labs]]//-->
:[[User:Shawndouglas/sandbox/sublevel15|Appendix 1. Blank LIMSpec template for manufacturing labs]]
::A1. Introduction and methodology
::A2. Primary laboratory workflow
::A3. Maintaining laboratory workflow and operations
::A4. Specialty laboratory functions
::A5. Technology and performance improvements
::A6. Security and integrity of systems and operations
::A7. Putting those requirements to practical use and caveats
::A8. LIMSpec in Microsoft Word format
 
<!---Place all category tags here-->

Latest revision as of 18:07, 20 September 2023

Sandbox begins below

Material testing can focus on specific industries (e.g., automotive, construction, and pharmaceutical), products (e.g., car seats, asphalt, and medical devices), or raw materials (e.g., steel, gravel, and zirconia ceramic).

About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/

Material testing domains:

  • Aerospace
    • Adhesives
    • Composites
    • Fasteners
    • Paints and primers
    • Sealants
    • Etc.
  • Automotive
    • Adhesives
    • Coatings
    • Foams
    • Lighting and high-visibility solutions
    • Plastics
    • Seating
    • Etc.
  • Carbon
    • Activated carbon
    • Coal tar
    • Etc.
  • Coatings, linings, and sealants
    • Ceramic coatings
    • Metal coatings
    • Pipe linings
    • Thermal sprays
    • Etc.
  • Construction and engineering
    • Asphalt
    • Brick and tile
    • Fasteners
    • Fenestration and glazing products (i.e., windows, doors, glass)
    • Geosynthetics
    • Plumbing
    • Soil
    • Etc.
  • Insulation, foam, and composites
    • Fiberglass
    • Flexible and laminate urethane foam composite
    • Polyester resins
    • Etc.
  • Lubricants and thickeners
    • Metallic stearates
    • Powdered metal
    • Pre-formed grease thickeners
    • Etc.
  • Medical devices
    • Ceramics
    • Metals
    • Screws
    • Etc.
  • Metals
    • Aluminum
    • Castings
    • Copper
    • Rebar
    • Steel
    • Tubing
    • Welds
    • Zinc
    • Etc.
  • Packaging and labeling
    • Cardboard
    • Label adhesives
    • Pharmaceutical packaging
    • Sterile barrier materials
    • Etc.
  • Paints and oils
    • Interior/Exterior paints
    • Organic coatings
    • Paint on parts
    • Transformer oil
    • Etc.
  • Paper
    • Cellulose paper tape
    • Crepe paper and tubes
    • Kraft paper
    • Pressboard
    • Etc.
  • Polymers and plastics
  • Raw materials
    • Food and beverage ingredients
    • Elemental material
    • Pharmaceutical ingredients
    • Etc.
  • Reference materials
    • Cannabinoids
    • Coals and cokes
    • Elemental gasses
    • Isotope reference material
    • Organic analytical reference material
    • Pesticides
    • Etc.
  • Rubbers
    • Bump stops
    • Gloves
    • Neoprene
    • Silicone
    • Tires
    • Etc.
  • Electronics and energy devices
    • Batteries
    • Semiconductors
    • Solar panels
    • Transformers
    • Etc.
  • Textiles
    • Carpet
    • Drapery
    • Non-woven fabrics
    • Upholstery
    • Etc.
  • Wood
    • Dowel
    • Flooring
    • Lumber
    • Medium-density fibreboard (MDF)
    • Etc.

Test method developers:

  • Aerospace Industries Association (AIA/NAS/NASM)
  • American Architectural Manufacturers Association (AAMA)
  • American Association of State Highway and Transportation Officials (AASHTO)
  • American Association of Textile Chemists and Colorists (AATCC)
  • American Institute of Timber Construction (AITC)
  • American National Standards Institute (ANSI)
  • American Petroleum Institute (API)
  • American Society of Mechanical Engineers (ASME)
  • American Welding Society (AWS)
  • American Wood Protection Association (AWPA)
  • AOAC International (Association of Official Agricultural Chemists; AOAC)
  • ASTM International (ASTM)
  • Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
  • Canadian Standards Association (CSA)
  • Chemical Fabrics & Film Association (CFFA)
  • Consumer Product Safety Commission (CPSC)
  • Deutsches Institut für Normung (DIN)
  • Electronic Components Industry Association (ECIA/EIA)
  • European Telecommunications Standards Institute (ETSI)
  • Federal Motor Vehicle Safety Standard (FMVSS)
  • FM Approvals (FM)
  • GE Aerospace (GE)
  • Government and military (MIL, Fed, Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
  • Industrial Fasteners Institute (IFI)
  • Institute of Electrical and Electronics Engineers (IEEE)
  • International Atomic Energy Agency (IAEA) (1, 2, 3)
  • International Code Council (ICC-ES)
  • International Electrotechnical Commission (IEC)
  • International Maritime Organization (IMO)
  • International Organization for Standardization (ISO)
  • International Safe Transit Association (ISTA)
  • IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
  • Japanese Standards Association (JAS/JIS)
  • NACE International (National Association of Corrosion Engineers; NACE)
  • National Fire Protection Association (NFPA)
  • New York State Steel Construction Manual (NNSSCM/SCM)
  • NSF International (National Sanitation Foundation; NSF)
  • Pressure Sensitive Tape Council (PSTC)
  • Radio Technical Commission for Aeronautics (RTCA)
  • Suppliers of Advanced Composite Materials Association (SACMA)
  • SAE International (SAE/AMS/AS)
  • TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
  • Truss Plate Institute (TPI)
  • UL Standards and Engagement (UL)
  • United States Pharmacopeia Convention (USP)