Difference between revisions of "User:Shawndouglas/sandbox/sublevel8"

From LIMSWiki
Jump to navigationJump to search
 
(103 intermediate revisions by the same user not shown)
Line 3: Line 3:
| type      = notice
| type      = notice
| style    = width: 960px;
| style    = width: 960px;
| text      = This is sublevel1 of my sandbox, where I play with features and test MediaWiki code. If you wish to leave a comment for me, please see [[User_talk:Shawndouglas|my discussion page]] instead.<p></p>
| text      = This is sublevel8 of my sandbox, where I play with features and test MediaWiki code. If you wish to leave a comment for me, please see [[User_talk:Shawndouglas|my discussion page]] instead.<p></p>
}}
}}


==Sandbox begins below==
==Sandbox begins below==
Material testing can focus on specific industries (e.g., automotive, construction, and pharmaceutical), products (e.g., car seats, asphalt, and medical devices), or raw materials (e.g., steel, gravel, and zirconia ceramic).


==1. Sample/Experiment Registration==
About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/
{|
 
| STYLE="vertical-align:top;"|
Material testing domains:
{| class="wikitable collapsible" border="1" cellpadding="10" cellspacing="0"
* Aerospace
|-
**Adhesives
  ! colspan="2" style="text-align:left; padding-left:20px; padding-top:10px; padding-bottom:10px;"|
**Composites
|-
**Fasteners
  ! style="color:brown; background-color:#ffffee; width:500px;"| Regulation, Specification, or Guidance
**Paints and primers
  ! style="color:brown; background-color:#ffffee; width:700px;"| Requirement
**Sealants
|-
**Etc.
  | style="padding:5px; width:500px;" |[https://www.law.cornell.edu/cfr/text/42/493.1241 42 CFR Part 493.1241]<br />[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-1]
*Automotive
  | style="background-color:white;" |The system should allow for sample registration prior to (e.g., preregistration) or after (e.g., registration) physical sample collection.
**Adhesives
|-
**Coatings
  | style="padding:5px; width:500px;" |
**Foams
[https://www.law.cornell.edu/cfr/text/21/58.105 21 CFR Part 58.105 (c)]<br />
**Lighting and high-visibility solutions
[https://www.law.cornell.edu/cfr/text/21/211.84 21 CFR Part 211.84]<br />
**Plastics
[https://www.law.cornell.edu/cfr/text/21/211.101 21 CFR Part 211.101]<br />
**Seating
[https://www.law.cornell.edu/cfr/text/21/226.80 21 CFR Part 226.80]<br />
**Etc.
[https://www.law.cornell.edu/cfr/text/21/606.120 21 CFR Part 606.120 (b)]<br />
*Carbon
[https://www.law.cornell.edu/cfr/text/21/606.121 21 CFR Part 606.121 (c–i)]<br />
**Activated carbon
[https://www.law.cornell.edu/cfr/text/21/606.140 21 CFR Part 606.140 (c)]<br />
**Coal tar
[https://www.law.cornell.edu/cfr/text/29/1910.1030 29 CFR Part 1910.1030 (g)]<br />
**Etc.
[https://www.law.cornell.edu/cfr/text/29/1910.1096 29 CFR Part 1910.1096 (e1-6)]<br />
*Coatings, linings, and sealants
[https://www.law.cornell.edu/cfr/text/42/493.1232 42 CFR Part 493.1232]<br />
**Ceramic coatings
[http://www.abft.org/files/ABFT_LAP_Standards_May_31_2013.pdf ABFT Accreditation Manual Sec. D]<br />
**Metal coatings
[https://www.astm.org/Standards/E1492.htm ASTM E1492-11 4.1.1.6]<br />
**Pipe linings
[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-2]<br />
**Thermal sprays
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 3.2.2]<br />
**Etc.
[https://www.epa.gov/quality/guidance-quality-assurance-project-plans-epa-qag-5 EPA QA/G-5 2.2.3]<br />
*Construction and engineering
[https://ec.europa.eu/health/sites/health/files/files/eudralex/vol-1/dir_2003_94/dir_2003_94_en.pdf E.U. Commission Directive 2003/94/EC Article 15]<br />[http://www.oecd.org/chemicalsafety/testing/oecdseriesonprinciplesofgoodlaboratorypracticeglpandcompliancemonitoring.htm OECD GLP Principles 6.1]<br />
**Asphalt
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sampling Procedures for PDP 6.4.1.2.6]<br />
**Brick and tile
[https://extranet.who.int/prequal/content/who-technical-report-series WHO Technical Report Series, #986, Annex 2, 17.11]
**Fasteners
  | style="background-color:white;" |The system should allow for creation and use of pre-configured (e.g., for basic clinical samples) and customizable (e.g., for regulated activities such as blood collection and storage) sample labels, with barcode support.
**Fenestration and glazing products (i.e., windows, doors, glass)
|-
**Geosynthetics
  | style="padding:5px; width:500px;" |[https://www.law.cornell.edu/cfr/text/45/162.410 45 CFR Part 162.410]<br />[https://www.fbi.gov/services/cjis/cjis-security-policy-resource-center CJIS Security Policy 5.6.1]
**Plumbing
  | style="background-color:white;" |The system shall provide a means to assign unique identifiers such as a National Provider Identifier (NPI) or Originating Agency Identifier (ORI) to the enacting entity and any subcontracted entity. The unique identifier should be able to appear on necessary records, documents, and reports referencing those entities.
**Soil
|-
**Etc.
  | style="padding:5px; width:500px;" |[https://www.law.cornell.edu/cfr/text/42/493.1241 42 CFR Part 493.1241]<br />[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-3]
* Insulation, foam, and composites
  | style="background-color:white;" |The system should provide a means for automatically registering samples in the system using any number of triggers such as dates, times, web requests, and intra-system methods like APIs and web services.
**Fiberglass
|-
**Flexible and laminate urethane foam composite
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-4]<br />[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sampling Procedures for PDP 6.4.1.1.3]
**Polyester resins
  | style="background-color:white;" |The system should permit metadata like lot number, client demographics, sampling point, random selection process used, and industry-specific items to be included during registration.
**Etc.
|-
*Lubricants and thickeners
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-5]
**Metallic stearates
  | style="background-color:white;" |The system shall allow for the addition, modification, and removal of new, pre-defined, and custom analytical tests.
**Powdered metal
|-
**Pre-formed grease thickeners
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-6]
**Etc.
  | style="background-color:white;" |The system should offer safety information related to a submitted sample upon registration that is relevant to the lab's location and industry.
* Medical devices
|-
**Ceramics
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-7]
**Metals
  | style="background-color:white;" |The system should support the creation and use of predefined metadata templates, as well as ad-hoc, single, and multiple samples.
**Screws
|-
**Etc.
  | style="padding:5px; width:500px;" |
*Metals
[https://www.law.cornell.edu/cfr/text/7/331.17 7 CFR Part 331.17]<br />
**Aluminum
[https://www.law.cornell.edu/cfr/text/9/121.17 9 CFR Part 121.17]<br />
**Castings
[https://www.law.cornell.edu/cfr/text/21/58.105 21 CFR Part 58.105 (c)]<br />
**Copper
[https://www.law.cornell.edu/cfr/text/21/58.105 21 CFR Part 58.195]<br />
**Rebar
[https://www.law.cornell.edu/cfr/text/21/211.84 21 CFR Part 211.84]<br />
**Steel
[https://www.law.cornell.edu/cfr/text/21/211.170 21 CFR Part 211.170]<br />
**Tubing
[https://www.law.cornell.edu/cfr/text/21/211.194 21 CFR Part 211.194]<br />
**Welds
[https://www.law.cornell.edu/cfr/text/21/312.57 21 CFR Part 312.57 (d)]<br />
**Zinc
[https://www.law.cornell.edu/cfr/text/40/141.33 40 CFR Part 141.33]<br />
**Etc.
[https://www.law.cornell.edu/cfr/text/42/73.17 42 CFR Part 73.17]<br />
* Packaging and labeling
[https://www.law.cornell.edu/cfr/text/42/493.1105 42 CFR Part 493.1105]<br />
**Cardboard
[https://www.law.cornell.edu/cfr/text/42/493.1241 42 CFR Part 493.1241]<br />
**Label adhesives
[https://www.law.cornell.edu/cfr/text/42/493.1242 42 CFR Part 493.1242]<br />
**Pharmaceutical packaging
[https://www.law.cornell.edu/cfr/text/42/493.1274 42 CFR Part 493.1274 (f)]<br />
**Sterile barrier materials
[https://www.law.cornell.edu/cfr/text/42/493.1283 42 CFR Part 493.1283]<br />
**Etc.
[https://www.aafco.org/Publications/QA-QC-Guidelines-for-Feed-Laboratories AAFCO QA/QC Guidelines for Feed Laboratories Sec. 2.2–3]<br />
* Paints and oils
[https://www.aavld.org/accreditation-requirements-page AAVLD Requirements for an AVMDL Sec. 5.7.1.2]<br />
**Interior/Exterior paints
[http://www.abft.org/files/ABFT_LAP_Standards_May_31_2013.pdf ABFT Accreditation Manual Sec. D]<br />
**Organic coatings
[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-8]<br />
**Paint on parts
[https://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=30006MXP.PDF EPA 815-R-05-004 Chap. IV, Sec. 6 and 8]<br />
**Transformer oil
[https://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=30006MXP.PDF EPA 815-R-05-004 Chap. VI, Sec. 8]<br />
**Etc.
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 3.2]<br />
* Paper
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.4.10–11]<br />
**Cellulose paper tape
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.7.1–6]<br />
**Crepe paper and tubes
[https://www.epa.gov/quality/guidance-quality-assurance-project-plans-epa-qag-5 EPA QA/G-5 2.2.2 and 2.2.3]<br />
**Kraft paper
[https://ec.europa.eu/health/sites/health/files/files/eudralex/vol-1/dir_2003_94/dir_2003_94_en.pdf E.U. Commission Directive 2003/94/EC Article 11.4]<br />
**Pressboard
[https://www.iso.org/standard/56115.html ISO 15189:2012 5.7.2]<br />
**Etc.
[http://www.oecd.org/chemicalsafety/testing/oecdseriesonprinciplesofgoodlaboratorypracticeglpandcompliancemonitoring.htm OECD GLP Principles 6.1]<br />
*Polymers and plastics
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sample Processing and Analysis Procedures for PDP 5.1 and 5.1.13]<br />
**Biopolymers
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sampling Procedures for PDP 5.1]<br />
**Condoms and gloves
[https://extranet.who.int/prequal/content/who-technical-report-series WHO Technical Report Series, #986, Annex 2, 17.11 and 17.21]
**Payment cards
  | style="background-color:white;" |The system shall be able to define the sample collection details for registered samples, including container size and type, number of containers, collection date and time, name of the collector, lot number, storage location, preservation method, collection methods used (standard and nonstandard), safety concerns, and retention period.
**O-rings
|-  
**[https://www.sciencedirect.com/science/article/pii/S1751616121005105 Silicone-based biological tissue mimics]
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-9]<br />[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 3.2.1]<br />[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.4.5]
**Thermoplastic resins
  | style="background-color:white;" |The system should allow for the addition of observations and descriptions to registered samples in the form of free text.
**Etc.
|-
* Raw materials
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-10]
**Food and beverage ingredients
  | style="background-color:white;" |The system should support the creation of user-definable default sample registration preferences and/or input screens.
**Elemental material
|-
**Pharmaceutical ingredients
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-11]
**Etc.
  | style="background-color:white;" |The system should allow for the recording of sample delivery details such as deliverer, location, and date and time for a preregistered sample.
* Reference materials
|-
**Cannabinoids
  | style="padding:5px; width:500px;" |
**Coals and cokes
[https://www.law.cornell.edu/cfr/text/21/58.107 21 CFR Part 58.107 (c)]<br />
**Elemental gasses
[https://www.law.cornell.edu/cfr/text/21/211.194 21 CFR Part 211.194]<br />
**Isotope reference material
[https://www.law.cornell.edu/cfr/text/42/493.1241 42 CFR Part 493.1241]<br />
**Organic analytical reference material
[https://www.law.cornell.edu/cfr/text/42/493.1274 42 CFR Part 493.1274]<br />
**Pesticides
[https://www.law.cornell.edu/cfr/text/42/493.1283 42 CFR Part 493.1283]<br />
**Etc.
[https://www.aavld.org/accreditation-requirements-page AAVLD Requirements for an AVMDL Sec. 5.8.2]<br />
*Rubbers
[http://www.abft.org/files/ABFT_LAP_Standards_May_31_2013.pdf ABFT Accreditation Manual D-3]<br />
**Bump stops
[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-12]<br />
**Gloves
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 3.2.2]<br />
**Neoprene
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.1.11]<br />
**Silicone
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.4.10]<br />
**Tires
[https://www.epa.gov/quality/guidance-quality-assurance-project-plans-epa-qag-5 EPA QA/G-5 2.2.3]<br />
**Etc.
[https://ec.europa.eu/health/sites/health/files/files/eudralex/vol-1/dir_2003_94/dir_2003_94_en.pdf E.U. Commission Directive 2003/94/EC Article 15]<br />
*Electronics and energy devices
[https://www.iso.org/standard/66912.html ISO/IEC 17025:2017 7.4.2]<br />
**Batteries
[http://www.oecd.org/chemicalsafety/testing/oecdseriesonprinciplesofgoodlaboratorypracticeglpandcompliancemonitoring.htm OECD GLP Principles 6.2]<br />
**Semiconductors
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sample Processing and Analysis Procedures for PDP 5.1.11]<br />
**Solar panels
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sampling Procedures for PDP 6.4.1.2.5]<br />
**Transformers
[https://extranet.who.int/prequal/content/who-technical-report-series WHO Technical Report Series, #986, Annex 2, 17.11]
**Etc.
  | style="background-color:white;" |The system shall assign each sample registered in the system a unique identifier using methodologies such as an ID with an incrementing integer or a user-defined naming format.
*Textiles
|-
**Carpet
  | style="padding:5px; width:500px;" |
**Drapery
[https://www.law.cornell.edu/cfr/text/7/331.17 7 CFR Part 331.17]<br />
**Non-woven fabrics
[https://www.law.cornell.edu/cfr/text/9/121.17 9 CFR Part 121.17]<br />
**Upholstery
[https://www.law.cornell.edu/cfr/text/21/58.107 21 CFR Part 58.107 (d)]<br />
**Etc.
[https://www.law.cornell.edu/cfr/text/21/211.194 21 CFR Part 211.194]<br />
*Wood
[https://www.law.cornell.edu/cfr/text/42/73.17 42 CFR Part 73.17]<br />
**Dowel
[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-13]<br />
**Flooring
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.4.7]<br />
**Lumber
[https://www.epa.gov/quality/guidance-quality-assurance-project-plans-epa-qag-5 EPA QA/G-5 2.2.3]<br />
**Medium-density fibreboard (MDF)
[http://www.oecd.org/chemicalsafety/testing/oecdseriesonprinciplesofgoodlaboratorypracticeglpandcompliancemonitoring.htm OECD GLP Principles 6.1]
**Etc.
  | style="background-color:white;" |The system shall provide a user-friendly means for acknowledging the physical reception of sample material in the laboratory, including date and time of reception.
 
|-
Test method developers:
  | style="padding:5px; width:500px;" |[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-14]<br />[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.4.6]
* Aerospace Industries Association (AIA/NAS/NASM)
  | style="background-color:white;" |The system shall allow for the comparison of received samples to the sampling requirements of the customer or laboratory in order to identify variances from those requirements.
* American Architectural Manufacturers Association (AAMA)
|-
* American Association of State Highway and Transportation Officials (AASHTO)
  | style="padding:5px; width:500px;" |
* American Association of Textile Chemists and Colorists (AATCC)
[https://www.aavld.org/accreditation-requirements-page AAVLD Requirements for an AVMDL Sec. 5.8.3]<br />
* American Institute of Timber Construction (AITC)
[https://www.astm.org/Standards/E1492.htm ASTM E1492-11 4.1.1.5]<br />
* American National Standards Institute (ANSI)
[https://www.astm.org/Standards/E1492.htm ASTM E1492-11 4.1.6]<br />
* American Petroleum Institute (API)
[https://www.astm.org/Standards/E1492.htm ASTM E1492-11 4.3.3.2]<br />
* American Society of Mechanical Engineers (ASME)
[https://www.astm.org/Standards/E1578.htm ASTM E1578-18 C-1-15]<br />
* American Welding Society (AWS)
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.4.13]<br />
* American Wood Protection Association (AWPA)
[https://www.epa.gov/sites/production/files/documents/erln_lab_requirements.pdf EPA ERLN Laboratory Requirements 4.11.8]<br />
* AOAC International (Association of Official Agricultural Chemists; AOAC)
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sample Processing and Analysis Procedures for PDP 5.1.3–7]<br />
* ASTM International (ASTM)
[https://www.ams.usda.gov/datasets/pdp/pdp-standard-operating-procedures USDA Sampling Procedures for PDP 6.4.1.1.9]
* Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
  | style="background-color:white;" |The system should provide a means to document any undesirable or unexpected characteristics of a submitted sample.
* Canadian Standards Association (CSA)
|-
* Chemical Fabrics & Film Association (CFFA)
|}
* Consumer Product Safety Commission (CPSC)
|}
* Deutsches Institut für Normung (DIN)
* Electronic Components Industry Association (ECIA/EIA)
* European Telecommunications Standards Institute (ETSI)
* Federal Motor Vehicle Safety Standard (FMVSS)
* FM Approvals (FM)
* GE Aerospace (GE)
* Government and military (MIL, [https://fedspecs.gsa.gov/s/federal-standards Fed], Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
* Industrial Fasteners Institute (IFI)
* Institute of Electrical and Electronics Engineers (IEEE)
* International Atomic Energy Agency (IAEA) ([https://www.iaea.org/topics/material-analysis 1], [https://www.iaea.org/topics/other-non-destructive-testing 2], [https://www.iaea.org/topics/materials 3])
* International Code Council (ICC-ES)
* International Electrotechnical Commission (IEC)
* International Maritime Organization (IMO)
* International Organization for Standardization (ISO)
* International Safe Transit Association (ISTA)
* IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
* Japanese Standards Association (JAS/JIS)
* NACE International (National Association of Corrosion Engineers; NACE)
* National Fire Protection Association (NFPA)
* [https://www.dot.ny.gov/divisions/engineering/structures/manuals/scm/repository/SCM_4th_Edition_1-2018.pdf New York State Steel Construction Manual (NNSSCM/SCM)]
* NSF International (National Sanitation Foundation; NSF)
* Pressure Sensitive Tape Council (PSTC)
* Radio Technical Commission for Aeronautics (RTCA)
* Suppliers of Advanced Composite Materials Association (SACMA)
* SAE International (SAE/AMS/AS)
* TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
* Truss Plate Institute (TPI)
* UL Standards and Engagement (UL)
* United States Pharmacopeia Convention (USP)

Latest revision as of 18:07, 20 September 2023

This is sublevel8 of my sandbox, where I play with features and test MediaWiki code. If you wish to leave a comment for me, please see my discussion page instead.

Sandbox begins below

Material testing can focus on specific industries (e.g., automotive, construction, and pharmaceutical), products (e.g., car seats, asphalt, and medical devices), or raw materials (e.g., steel, gravel, and zirconia ceramic).

About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/

Material testing domains:

  • Aerospace
    • Adhesives
    • Composites
    • Fasteners
    • Paints and primers
    • Sealants
    • Etc.
  • Automotive
    • Adhesives
    • Coatings
    • Foams
    • Lighting and high-visibility solutions
    • Plastics
    • Seating
    • Etc.
  • Carbon
    • Activated carbon
    • Coal tar
    • Etc.
  • Coatings, linings, and sealants
    • Ceramic coatings
    • Metal coatings
    • Pipe linings
    • Thermal sprays
    • Etc.
  • Construction and engineering
    • Asphalt
    • Brick and tile
    • Fasteners
    • Fenestration and glazing products (i.e., windows, doors, glass)
    • Geosynthetics
    • Plumbing
    • Soil
    • Etc.
  • Insulation, foam, and composites
    • Fiberglass
    • Flexible and laminate urethane foam composite
    • Polyester resins
    • Etc.
  • Lubricants and thickeners
    • Metallic stearates
    • Powdered metal
    • Pre-formed grease thickeners
    • Etc.
  • Medical devices
    • Ceramics
    • Metals
    • Screws
    • Etc.
  • Metals
    • Aluminum
    • Castings
    • Copper
    • Rebar
    • Steel
    • Tubing
    • Welds
    • Zinc
    • Etc.
  • Packaging and labeling
    • Cardboard
    • Label adhesives
    • Pharmaceutical packaging
    • Sterile barrier materials
    • Etc.
  • Paints and oils
    • Interior/Exterior paints
    • Organic coatings
    • Paint on parts
    • Transformer oil
    • Etc.
  • Paper
    • Cellulose paper tape
    • Crepe paper and tubes
    • Kraft paper
    • Pressboard
    • Etc.
  • Polymers and plastics
  • Raw materials
    • Food and beverage ingredients
    • Elemental material
    • Pharmaceutical ingredients
    • Etc.
  • Reference materials
    • Cannabinoids
    • Coals and cokes
    • Elemental gasses
    • Isotope reference material
    • Organic analytical reference material
    • Pesticides
    • Etc.
  • Rubbers
    • Bump stops
    • Gloves
    • Neoprene
    • Silicone
    • Tires
    • Etc.
  • Electronics and energy devices
    • Batteries
    • Semiconductors
    • Solar panels
    • Transformers
    • Etc.
  • Textiles
    • Carpet
    • Drapery
    • Non-woven fabrics
    • Upholstery
    • Etc.
  • Wood
    • Dowel
    • Flooring
    • Lumber
    • Medium-density fibreboard (MDF)
    • Etc.

Test method developers:

  • Aerospace Industries Association (AIA/NAS/NASM)
  • American Architectural Manufacturers Association (AAMA)
  • American Association of State Highway and Transportation Officials (AASHTO)
  • American Association of Textile Chemists and Colorists (AATCC)
  • American Institute of Timber Construction (AITC)
  • American National Standards Institute (ANSI)
  • American Petroleum Institute (API)
  • American Society of Mechanical Engineers (ASME)
  • American Welding Society (AWS)
  • American Wood Protection Association (AWPA)
  • AOAC International (Association of Official Agricultural Chemists; AOAC)
  • ASTM International (ASTM)
  • Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
  • Canadian Standards Association (CSA)
  • Chemical Fabrics & Film Association (CFFA)
  • Consumer Product Safety Commission (CPSC)
  • Deutsches Institut für Normung (DIN)
  • Electronic Components Industry Association (ECIA/EIA)
  • European Telecommunications Standards Institute (ETSI)
  • Federal Motor Vehicle Safety Standard (FMVSS)
  • FM Approvals (FM)
  • GE Aerospace (GE)
  • Government and military (MIL, Fed, Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
  • Industrial Fasteners Institute (IFI)
  • Institute of Electrical and Electronics Engineers (IEEE)
  • International Atomic Energy Agency (IAEA) (1, 2, 3)
  • International Code Council (ICC-ES)
  • International Electrotechnical Commission (IEC)
  • International Maritime Organization (IMO)
  • International Organization for Standardization (ISO)
  • International Safe Transit Association (ISTA)
  • IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
  • Japanese Standards Association (JAS/JIS)
  • NACE International (National Association of Corrosion Engineers; NACE)
  • National Fire Protection Association (NFPA)
  • New York State Steel Construction Manual (NNSSCM/SCM)
  • NSF International (National Sanitation Foundation; NSF)
  • Pressure Sensitive Tape Council (PSTC)
  • Radio Technical Commission for Aeronautics (RTCA)
  • Suppliers of Advanced Composite Materials Association (SACMA)
  • SAE International (SAE/AMS/AS)
  • TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
  • Truss Plate Institute (TPI)
  • UL Standards and Engagement (UL)
  • United States Pharmacopeia Convention (USP)
Retrieved from "https://www.limswiki.org/index.php?title=User:Shawndouglas/sandbox/sublevel8&oldid=53056"