Difference between revisions of "User:Shawndouglas/sandbox/sublevel9"

From LIMSWiki
Jump to navigationJump to search
Line 50: Line 50:
:::2.2.5 Surface Coating Materials Regulations (SOR/2016-193) - Canada
:::2.2.5 Surface Coating Materials Regulations (SOR/2016-193) - Canada
::2.3 Standardized test methods for materials
::2.3 Standardized test methods for materials
:::Aerospace Industries Association (AIA/NAS/NASM)
:::American Architectural Manufacturers Association (AAMA)
:::American Association of State Highway and Transportation Officials (AASHTO)
:::American Association of Textile Chemists and Colorists (AATCC)
:::American Institute of Timber Construction (AITC)
:::American National Standards Institute (ANSI)
:::American Petroleum Institute (API)
:::American Society of Mechanical Engineers (ASME)
:::American Welding Society (AWS)
:::American Wood Protection Association (AWPA)
:::AOAC International (Association of Official Agricultural Chemists; AOAC)
:::ASTM International (ASTM)
:::Automakers (Ford, GM, Honda, PACCAR, Peugeot, Subaru, Tesla, Toyota, Volvo, etc.)
:::Canadian Standards Association (CSA)
:::Chemical Fabrics & Film Association (CFFA)
:::Consumer Product Safety Commission (CPSC)
:::Deutsches Institut für Normung (DIN)
:::Electronic Components Industry Association (ECIA/EIA)
:::European Telecommunications Standards Institute (ETSI)
:::Federal Motor Vehicle Safety Standard (FMVSS)
:::FM Approvals (FM)
:::GE Aerospace (GE)
:::Government and military (MIL, Fed, Consumer Product Safety Commission, CSFA, EPA, FDA, MMM, NAVSEA, United Nations Economic Commission for Europe, etc.)
:::Industrial Fasteners Institute (IFI)
:::Institute of Electrical and Electronics Engineers (IEEE)
:::International Code Council (ICC-ES)
:::International Electrotechnical Commission (IEC)
:::International Maritime Organization (IMO)
:::International Organization for Standardization (ISO)
:::International Safe Transit Association (ISTA)
:::IPC International (Institute for Interconnecting and Packaging Electronic Circuits; IPC)
:::Japanese Standards Association (JAS/JIS)
:::NACE International (National Association of Corrosion Engineers; NACE)
:::National Fire Protection Association (NFPA)
:::New York State Steel Construction Manual (NNSSCM/SCM)
:::NSF International (National Sanitation Foundation; NSF)
:::Pressure Sensitive Tape Council (PSTC)
:::Radio Technical Commission for Aeronautics (RTCA)
:::Suppliers of Advanced Composite Materials Association (SACMA)
:::SAE International (SAE/AMS/AS)
:::TAPPI (Technical Association of the Pulp and Paper Industry; TAPPI)
:::Truss Plate Institute (TPI)
:::UL Standards and Engagement (UL)
:::United States Pharmacopeia Convention (USP)
::2.4 Materials laboratory accreditation
::2.4 Materials laboratory accreditation
:[[User:Shawndouglas/sandbox/sublevel12|3. Choosing laboratory informatics software for your materials testing lab]]
::3.1 Evaluation and selection
:::3.1.1 Technology considerations
::::3.1.1.1 Laboratory informatics options
:::3.1.2 Features and functions
::::3.1.2.1 Base features
::::3.1.2.2 Specialty features
:::3.1.3 Cybersecurity considerations
:::3.1.4 Regulatory compliance considerations
:::3.1.5 System flexibility
:::3.1.6 Cost considerations
::3.2 Implementation
:::3.2.1 Internal and external integrations
::3.3 MSW, updates, and other contracted services
::3.4 How a user requirements specification fits into the entire process (LIMSpec)
:[[User:Shawndouglas/sandbox/sublevel13|4. Resources for selecting and implementing informatics solutions]]
::4.1 LIMS vendors
::4.2 Consultants
::4.3 Professional
:::4.3.1 Trade organizations
:::4.3.2 Conferences and trade shows
::4.4 LIMSpec
:[[User:Shawndouglas/sandbox/sublevel14|5. Taking the next step]]
::5.1 Conduct initial research into a specification document tailored to your lab's needs
::5.2 Issue some of the specification as part of a request for information (RFI)
::5.3 Respond to or open dialogue with vendors
:::5.3.1 The value of demonstrations
::5.4 Finalize the requirements specification and choose a vendor
:[[User:Shawndouglas/sandbox/sublevel15|6. Closing remarks]]
:[[User:Shawndouglas/sandbox/sublevel16|Appendix 1. Blank LIMSpec template for manufacturing labs]]
::A1. Introduction and methodology
::A2. Primary laboratory workflow
::A3. Maintaining laboratory workflow and operations
::A4. Specialty laboratory functions
::A5. Technology and performance improvements
::A6. Security and integrity of systems and operations
::A7. Putting those requirements to practical use and caveats
::A8. LIMSpec in Microsoft Word format

Revision as of 16:16, 20 September 2023

Sandbox begins below

[[File:|right|500px]]

Title: LIMS Selection Guide for Materials Testing Laboratories

Edition: First Edition

Author for citation: Shawn E. Douglas

License for content: Creative Commons Attribution-ShareAlike 4.0 International

Publication date: ??? 2023


Description goes here...

The table of contents for LIMS Selection Guide for Materials Testing Laboratories is as follows:

1. Introduction to materials testing laboratories
1.1 Materials testing labs, then and now
1.1.1 Materials are inherently linked to creation (manufacturing and construction)
1.1.2
1.1.3 About chemical testing of raw materials https://a2la.org/accreditation/chemical-testing/
1.2 Laboratory roles and activities in the industry
1.2.1 R&D roles and activities
1.2.2 Pre-manufacturing and manufacturing roles and activities
1.2.3 Post-production regulation and security roles and activities
1.3 A word on quality control in manufacturing environments
2. Standards, regulations, and test methods affecting materials testing labs
2.1 Globally recognized materials manufacturing standards
2.1.1 American Society of Civil Engineers (ASCE) materials standards
2.1.2 ASTM International Volume 15.04
2.1.3 Canadian Standards Association (CSA) A3000 series
2.1.4 International Organization for Standardization (ISO) 10993
2.1.5 Metal Powder Industries Federation (MPIF) Standard 35 family
2.2 Regulations and laws around the world
2.2.1 21 CFR Part 175 and 176 - United States
2.2.2 Building Standard Law - Japan
2.2.3 The Furniture and Furnishings (Fire) (Safety) Regulations 1988 - United Kingdom
2.2.4 National Environment Protection (Used Packaging Materials) Measure 2011 - Australia
2.2.5 Surface Coating Materials Regulations (SOR/2016-193) - Canada
2.3 Standardized test methods for materials
2.4 Materials laboratory accreditation
3. Choosing laboratory informatics software for your materials testing lab
3.1 Evaluation and selection
3.1.1 Technology considerations
3.1.1.1 Laboratory informatics options
3.1.2 Features and functions
3.1.2.1 Base features
3.1.2.2 Specialty features
3.1.3 Cybersecurity considerations
3.1.4 Regulatory compliance considerations
3.1.5 System flexibility
3.1.6 Cost considerations
3.2 Implementation
3.2.1 Internal and external integrations
3.3 MSW, updates, and other contracted services
3.4 How a user requirements specification fits into the entire process (LIMSpec)
4. Resources for selecting and implementing informatics solutions
4.1 LIMS vendors
4.2 Consultants
4.3 Professional
4.3.1 Trade organizations
4.3.2 Conferences and trade shows
4.4 LIMSpec
5. Taking the next step
5.1 Conduct initial research into a specification document tailored to your lab's needs
5.2 Issue some of the specification as part of a request for information (RFI)
5.3 Respond to or open dialogue with vendors
5.3.1 The value of demonstrations
5.4 Finalize the requirements specification and choose a vendor
6. Closing remarks
Appendix 1. Blank LIMSpec template for manufacturing labs
A1. Introduction and methodology
A2. Primary laboratory workflow
A3. Maintaining laboratory workflow and operations
A4. Specialty laboratory functions
A5. Technology and performance improvements
A6. Security and integrity of systems and operations
A7. Putting those requirements to practical use and caveats
A8. LIMSpec in Microsoft Word format