Method batch

From LIMSWiki
Revision as of 21:39, 22 September 2022 by Shawndouglas (talk | contribs) (Updated article)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

A method batch, as defined by the United States Environmental Protection Agency via its SEDD Specification Version 5.2, is "a laboratory-defined identifier that is used to link multiple samples analyzed by one method and treated as a group for quality control (QC) purposes. A method batch should group samples with similar matrices and potential interferences." The EPA adds the following[1]:

This is a broader grouping than a preparation batch. In particular, a reanalysis of a sample stays in the same method batch, while it is likely to be in a different preparation batch. Operationally, this batch associates sample dependent QC such as duplicates and matrix spikes with a group of samples that may or may not be prepared at the same time.

References

  1. U.S. Environmental Protection Agency (March 2019). "Appendix A. Data Element Dictionary (DED)" (PDF). SEDD Specification Version 5.2. https://www.epa.gov/sites/default/files/2019-05/documents/sedd_spec_v5-2-march_2019_508.pdf. Retrieved 22 September 2022.